Bitmain Antminer E3 190K


In stock

Asic ETH ETC Miner Original Bitmain Antminer E3 190MH/S Ethash Ethereum ETH Mining Machine Economic Than 6 8 GPU CARDS


Manufacturer Bitmain
Model Antminer E3 (190Mh)
Release July 2018
Size 130 x 328 x 399mm
Weight 10500g
Chip boards 3
Chip count 18
Noise level 76db
Fan(s) 2
Power 760W
Voltage 11.60~13.00 V
Interface Ethernet
Temperature 0 – 40 °C
Humidity 5 – 95 %


ETH ETC Miner Original Bitmain Antminer E3 190MH/S Ethash Ethereum ETH Mining Machine Economic Than 6 8 GPU CARDS, Bitmain Antminer E3 190K

Antminer E3 Specifications:

Hashing algorithm: Ethash
Power consumption: 800W
Hashrate: 190MH/s

Parameters of ANTMINER E3
NO. Parameters Value
1 Product model E3
2 Total quantity of hash chips 18 PCS
3 Total quantity of hash boards 3 PCS
4 Total hash rate 190 MH/s
5 DC voltage input 11.60~13.00 V
6 DC current input @12V DC input @25℃ 58.9 A +4%
7 DC Power @12V DC input @25℃ 707 W +4%


220VAC Power @25℃ ,93% conversion 

efficiency of APW3++


760 W +4%



220VAC Power efficiency @25℃ ,93% 

conversion efficiency of APW3++


4 J/MH +4%

10 Weight(without package) 10.5 kg
11 Operation temperature 0-40 ℃
12 Storage temperature -40-85 ℃



Operation humidity


prevent condensation

14 Noise 76 dB
15 Networking connection mode Ethernet Cable
16 Power connection mode All two PCI-E ports are required to power the board. You can use one PSU to power multiple boards, 

but do not attempt to power one board with two PSUs.

We suggest to prevent the control board to be powered up before hash boards be powered up.

17 Size (Length*Width*Hight) 399.5mm*130mm*328.15mm


Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

PSU:  There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!

We recommend the APW3++ power supply or the APW7 power supply for use with the Antminer E3. One power supply supports one Antminer E3.

Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.

Be the first to review “Bitmain Antminer E3 190K”

Your email address will not be published. Required fields are marked *


There are no reviews yet.

See It Styled On Instagram

    No access token

You cannot copy content of this page

Main Menu

Bitmain Antminer E3 190K


Add to Cart